Automatic Ledger Welding Machine

1. Our Automatic Scaffolding Ledger Welding machine has Automatic loading, feeding pipes and the automatic unloading function, all of them can reduce the labor intensity.

2. The machine also is Equipped with clamping fixtures. It will guarantee that ledger will be installed in the right position and not move.

3. There will be 2 sets top quality welding source will go with our automatic ledger welding machine. The arc is stable, which controls heat input for good penetration and reduced spatter and smoke.

4. Both pipe ends are clamped by tooling fixtures. Rotation speed is controlled by diver.

Machine is equipped with 2 sets driven motors, and they will be synchronous rotation. Which will make sure the synchronous rotation, and machine's much longer working service time.

① No.1 welding torch

② No. 2 welding torch

③ Motor-driven pneumatic rotation spindle

④ Motor-driven pneumatic tail-stock

⑤ Pipe support

⑥ Automatic loading table

⑦ Automatic unloading device

⑧ Mig wire feeder

5. Siemens PLC and industrial touch screen are used to control the full welding process. The operation is simple and convenient. The welding performance is stable and reliable.

6. 24 months Warranty time.

Standard requirements for lap joints of scaffolding Ledger:

1. Overlap length: The lap length of the scaffolding poles should meet the standard to ensure the stability of the scaffolding. During the overlap process, different overlap lengths can be selected according to the height and load of the scaffolding, but generally not less than 1.5 times the pole diameter, nor less than 800mm.

2. Docking method: The docking method of the scaffolding poles should meet the standard to ensure a firm docking. Generally, the bolt-type docking is adopted, and the pipe clamp or the clamp-type docking can also be adopted. When docking, the horizontality and verticality of the two poles should be ensured, and the docking interface should be flat and free of burrs.

3. Fixing method: After the docking is completed, the two poles should be fixed in a fixed manner to ensure the stability of the scaffolding. The fixing method can be fixed by wire rope, bolts, nuts, etc., and at the same time, it must be ensured that the fixation is firm and reliable.

Hot Tags: automatic ledger welding machine, China automatic ledger welding machine manufacturers, suppliers, factory, Automatic Conveyor Roller Welding Machine, Flange Girth Welding Machine, scaffolding production equipment, CNC Oil Port Welding Machine, Tank Circular Seam Welding Machine, hydraulic cylinder welding machine